FIRE RESEARCH LABORATORIES -- PRIMER COATING  -- 8010-01-220-5971
<pre>=====================  Product Identification  =====================

Product ID:PRIMER COATING
MSDS Date:08/30/2000
FSC:8010
NIIN:01-220-5971
Status Code:A
=== Responsible Party ===
Company Name:FIRE RESEARCH LABORATORIES
Box:9645
City:ALBUQUERQUE
State:NM
ZIP:87119-9645
Country:US
Info Phone Num:505-883-8433
Emergency Phone Num:1-800-424-9300
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:0FWV2
=== Contractor Identification ===
Company Name:FIRE RESEARCH LABORATORIES
Box:9645
City:ALBUQUERQUE
State:NM
ZIP:87119-9645
Country:US
Phone:505-883-8433
CAGE:0FWV2

=============  Composition/Information on Ingredients  =============

Ingred Name:GLYCOL MONOBUTYL ETHER ACETATE
CAS:112-07-2
RTECS #:KJ8925000
Minumum % Wt:4.
Maxumum % Wt:8.

Ingred Name:TEXANOL ESTER ALCOHOL
Minumum % Wt:4.
Maxumum % Wt:8.

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:INHALATION, SKIN, EYES AND INGESTION.
    DELAYED EFFECTS: NO UNUSUAL SKIN CONTACT CAN BE MODERATELY
    IRRITATING TO SKIN TO LATEX SENSITIVE INDIVIDUALS.
Effects of Overexposure:HIGH VAPOR CONCENTRATIONS MAY CAUSE NASEA AND
    IRRITATION OF THE NOSE. THROAT AND RESPIRATORY TRACT.RESPIRATORY
    SYMPTOMS ASSOCIATED WITH PRE-EXISTING LUNG DISORDERS MY BE
    AGGRAVATED BY EXPOSURE TO THIS  MATERIAL.
Medical Cond Aggravated by Exposure:THERE IS CURRENTLY NO EVIDENCE OF
    ADVERSE EFFECTS RESULTING FROM ROUTINE EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:EYE CONTACT. IMMEDIATELY FLUSH EYES WITHWATER.SKIN CONTACT.
    RINSE AFFECTED AREA WITH SOAP AND WATER. INHALATION. REMOVE TO
    FRESH AIR IMMEDIATELY IF IRRITATION OCCURS. PROVIDE OXYGEN OR
    ARTFICIAL RESPI RATION IF REQUIRED. INGESTION. NO FIRST AID IS
    NORMALLY REQUIRED: HOWEVER. IF SWALLOWED AND SYMPTOMS DEVELOP SEEK
    MEDIACL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:(PENSKY-MARIENSS
Extinguishing Media:INORGANIC DRY CHEMICAL EXTINGUISHING COMPOUNDS.
    CARBON DIOXIDE. HIGH-EXPANSION CHEMICAL FOAMS. WATER FOG AND
    ALCOHOL FOAM.
Fire Fighting Procedures:FIRE FIGHTERS WEAR FULL EMERGENCY EQUIPMENT
    WITH SELF-CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE
    CLOTHING (DO NOT EXPOSE SKIN). CONTAINERS MAY DEVELOP PRESSURE AND
    BURST IF EXPOSED TO HEAT OR F LAME.
Unusual Fire/Explosion Hazard:NO UNUSUALHAZARDOUS COMBUSTION PRODUCTS:
    COMBUSTION PRODUCTS CAN INCLUDE CARBON OXIDES, HYDROCLORIC ACID.
    NITROGEN  OXIDES AND HYDROGEN CHLORIDE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PLACE LEAKING CONTAINERS IN A WELL VENTILATED
    AREA. CONFINE SPILLED MATERIAL AND ABSORB WITH SAND. SAWDUST, EARTH
    OR OTHER AVAILABLE SOLIDS. DIKE SPILLS TO PREVENT ENTRANCE INTO
    WATER TABLE OR AWTER S YSTEMS SWEEP AND PLACE MATERIAL IN A
    SUITABLE CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP FROM FREEZING! DO NOT BREATHE
    VAPORS KEEP CONTAINER(S) CLOSED WHEN NOT IN USE. KEEP AWAY FROM
    CHILDREN. DO NOT TAKE INTERNALLY. AVOID CONTACT WITH SKIN. WASH
    THOROUGHLY AFTER HANDLING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:ALWAYS WEAR RESPIRATORY	PROTECTIVE EQUIPMENT
    WHEN SPRAY APPLING THIS PRODUCT.
Ventilation:LOCAL EXHAUST: USE EXHAUST FANS TO MAINTAIN EXPOSURE LEVELS
    TO THE RESPECTIVE TLV'S FOR THE MATERIALS COMPONENTS.
Protective Gloves:BUTYL RUBBER. NITRILE RUBBER. LATEX. PVC, OR OTHER
    CHEMICAL RESISTANT GLOVES.
Eye Protection:PROTECTIVE GLASSES OR GOGGLES SHOULD BE WORN.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Vapor Density:>1(AIR=1)
Spec Gravity:11TO12LBS/GAL
VOC Pounds/Gallon:198
pH:(20 C)
Solubility in Water:COMPLETELY MISCABLE
Appearance and Odor:OPAQUE LIQUID WITH CHARACTERISTIC ODOR
Percent Volatiles by Volume:4-5

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACIDS AND OXIDIZING MATERIALS.
Stability Condition to Avoid:DO NOT  FREEZE
Conditions to Avoid Polymerization:WILL NOT OCCUR

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OR INCINERATE SOLIDIFIED WASTE IN
    ACCORDANCE WITH APPROPRIATE LOACL. STATE AND FEDERAL REGULATIONS.

=====================  Regulatory Information  =====================

Federal Regulatory Information:DOT: HAZARD CLASSIFICATION: NONE  PROPER
    SHIPPING NAME: PAINT OR RELATED MATERIAL UN CLASSIFICATION#. WATER
    BASED PAINTNO SPECIAL LABLES REQUIRED NOT RESTRICTED FOR DOMESTIC
    PASSENGER OR CARGO AIRCRAF T!
State Regulatory Information:

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.