THE STATE CHEMICAL MANUFACTURING CO. -- WTS  -- 6850-00N009158
<pre>=====================  Product Identification  =====================

Product ID:WTS
MSDS Date:01/01/1987
FSC:6850
NIIN:00N009158
=== Responsible Party ===
Company Name:THE STATE CHEMICAL MANUFACTURING CO.
Address:3100 HAMILTON AVE
City:CLEVELAND
State:OH
ZIP:44114-3701
Country:US
CAGE:GO984
=== Contractor Identification ===
Company Name:STATE CHEMICAL MANUFACTURING CO.
Address:3100 HAMILTON AVENUE
Box:City:CLEVELAND
State:OH
ZIP:44114-3701
Country:US
Phone:216-861-7114
CAGE:53798
Company Name:THE STATE CHEMICAL MFG. COMPANY
Address:3100 HAMILTON AVE
Box:City:CLEVELAND
State:OH
ZIP:44114-3701
Country:US
CAGE:GO984

=============  Composition/Information on Ingredients  =============

Ingred Name:METHYLENE CHLORIDE	(SARA III)
CAS:75-09-2
RTECS #:PA8050000
Fraction by Wt: <35%
OSHA PEL:500 PPM/C,1000; Z2
ACGIH TLV:50 PPM, A2; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: <15%
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT; 9192

Ingred Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: <15%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:ACETONE  (SARA III)
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: <15%
OSHA PEL:1000PPM
ACGIH TLV:750PPM/1000STEL;9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:DANGER:HARM/FATAL SWALL.INGES:DONT INDUCE
    VOMIT.INHAL:LT HEAD,HEACH,NAUS,VOMIT.SKIN:IRRIT.EYE:IRRIT

=======================  First Aid Measures  =======================

First Aid:INGES:DONT INDUCE VOMIT.GET MD IMMED/POISON CONTROL.INHAL:RMV
    TO FRESH AIR & GET MD IMMED.EYE:FLUSH IMMED W/PLENTY COOL H*2O AT
    LEAST 15 MIN.GET MD IMMED.DONT WEAR CONTACT LEN WHILE USE.SKIN:WASH
    THOR O W/PLENTY SOAP & H*2O.IRRIT PERSIST GET MD.

=====================  Fire Fighting Measures  =====================

Flash Point:>20F TOC
Extinguishing Media:H*2O FOG,FOAM,CO*2/DRY CHEMICAL
Fire Fighting Procedures:KEEP CONTR COOL.USE SHIELDING.WEAR SCBA & FULL
    PROT CLOTHING
Unusual Fire/Explosion Hazard:EXTREM FLAM.EXPOS TEMP >120F MAY HELP
    CONTR VENT,RUPT/BURST.THERM DECOM PROD MAY INCL HC1 & PHOSGENE

==================  Accidental Release Measures  ==================

Spill Release Procedures:RMV SOURCE OF HEAT,SPARKS/FLAME.VENT
    AREA.FLUSH W/LG VOL OF H*2O /ABSORB W/OIL ABSORBANT.

=============  Exposure Controls/Personal Protection  =============

Supplemental Safety and Health
RESP PRO:AVOID BREATH VPR /OVERSPRAY.NIOSH/MSHA APPRD RESP APPROP FOR
    EXPOSE OF CONCERN.

==================  Physical/Chemical Properties  ==================

Solubility in Water:>1
Appearance and Odor:OFF-WHITE AEROSOL SPRAY W/A SOLVENT ODOR
Percent Volatiles by Volume:80%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZER,STRONG CAUSTIC,CHEM ACT LT METAL,SOME PLAST
Stability Condition to Avoid:EXPOS TO TEMPS ABOVE 120F,SPARK /OPEN
    FLAMES.
Hazardous Decomposition Products:BURN PROD MAY CAUSE FORM OF
    HC1,PHOSGENE /CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DONT PUNCTURE /INCINERATE CAN.GIVE TO DISPOSE
    SERVICE EQUIP TO HANDLE & DISPOSE OF PRESSURIZED CONTRS.DISPOSE OF
    IN ACCORD W/STATE,LOCAL & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.