STATE CHEMICAL MANUFACTURING COMPANY -- CON-SEAL  -- 8030-00N010065
<pre>=====================  Product Identification  =====================

Product ID:CON-SEAL
MSDS Date:11/01/1985
FSC:8030
NIIN:00N010065
=== Responsible Party ===
Company Name:STATE CHEMICAL MANUFACTURING COMPANY
Address:3100 HAMILTON AVENUE
City:CLEVELAND
State:OH
ZIP:44114
Info Phone Num:216-861-7114
Emergency Phone Num:216-861-7114
CAGE:53798
=== Contractor Identification ===
Company Name:STATE CHEMICAL MANUFACTURING CO.
Address:3100 HAMILTON AVENUE
Box:City:CLEVELAND
State:OH
ZIP:44114-3701
Country:US
Phone:216-861-7114
CAGE:53798

=============  Composition/Information on Ingredients  =============

Ingred Name:AMMONIA  (SARA III)
CAS:7664-41-7
RTECS #:BO0875000
Fraction by Wt: <1%
Other REC Limits:N/K 
OSHA PEL:50 PPM
ACGIH TLV:25 PPM/35 STEL; 9293
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:ETHYLENE GLYCOL  (SARA III)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: <5%
Other REC Limits:N/K 
OSHA PEL:C 50 PPM
ACGIH TLV:C 50 PPM,VAPOR; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:TRIBUTOXYETHYLPHOSPHATE
CAS:78-51-3
RTECS #:KJ9800000
Fraction by Wt: <1%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:2-(2-BUTOXYETHOXY)ETHANOL
CAS:112-34-5
RTECS #:KJ9100000
Fraction by Wt: <10%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:N/K 
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:HARMFUL OR FATAL IF SWALLOWED.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:DIRECT CONTACT MAY RESULT IN
    IRRITATION.SKIN:N/K .INGESTION:HARMFUL OR FATAL IF
    SWALLOWED.INHALATION:AVOID PROLONGED BREATHING OF VAPOR.
Medical Cond Aggravated by Exposure:N/K 

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH IMMEDIATELY WITH PLENTY OF COOL WATER FOR AT LEAST
    15 MIN.IF IRRIT PERSISTS,SEEK MED ATTN.SKIN:WASH THOROUGHLY WITH
    PLENTY OF SOAP & WATER.IF IRRIT DEVELOPS,CONTACT MD.INGESTION:CALL
    MD IMM EDIATELY.INHALATION:AVOID PROLONGED BREATHING OF
    VAPORS.REMOVE PERSON TO FRESH AIR.IF IRRITATION OR DIFFICULTY IN
    BREATHING PERSISTS,CONTACT MD.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Lower Limits:N/K 
Upper Limits:N/K 
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:THERMAL DECOMPOSITION MAY RESULT IN THE
    FORMATION OF CARBON DIOXIDE AND/OR CARBON MONOXIDE GASES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB SPILL ON STATE OIL ABSORBANT,SAND OR
    VERMICULITE.FLUSH RESIDUE WITH A GOOD DETERGENT AND WATER TO THE
    DRAIN.
Neutralizing Agent:N/K 

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY PLACE.KEEP CLSD
    TIGHT WHEN NOT IN USE.AVOID FREEZING.DO NOT RETURN UNUSED MATL TO
    PROD CONTR.CAUTION:EYE IRRIT.HARMFUL IF SWALLOWED.
Other Precautions:READ & FOLLOW ALL LABEL DIRECTIONS & PRECAUTIONS
    BEFORE USE.INTENDED FOR INDUSTRIAL & INSTITUTIONAL USE ONLY.KEEP
    OUT OF THE REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
    CONCENTRATION BELOW TLV .
Protective Gloves:RECOMMENDED
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:N/K 
Work Hygienic Practices:N/K 
Supplemental Safety and Health
% VOLAT BY WEIGHT:74-76.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>212F,100C
Melt/Freeze Pt:M.P/F.P Text:N/K 
Decomp Temp:Decomp Text:N/K 
Vapor Pres:N/K 
Vapor Density:N/K 
Spec Gravity:1.018 (WATER=1)
pH:8.5
Evaporation Rate &amp; Reference:N/K 
Solubility in Water:COMPLETE
Appearance and Odor:A WHITE EMULSION WITH A MILD ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
N/K 
Stability Condition to Avoid:KEEP FROM HEAT OR FREEZING TEMPERATURES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY RESULT IN
    THE FORMATION OF CARBON DIOXIDE AND/OR CARBON MONOXIDE GASES.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
    FEDERAL,STATE AND LOCAL REGULATIONS .DO NOT REUSE EMPTY CONTAINERS
    FOR ANY PURPOSE.FLUSH THOROUGHLY WITH WATER,CRUSH AND DISCARD.GIVE
    RINSED DRUMS TO A DRUM R ECONDITIONER FOR RECYCLING.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.